Independent comprehensive security system
Independent comprehensive security system including M200N controller, card reader, Electrical Lock, Smart card or tag (According to the card reader frequency), Magnet Sensor to make the door smart, alarm and telephone system (if required by the customer), exit button according to the needs of the set and module remote receiver Its type and frequency can be changed according to customer needs.
The M200N controller is a comprehensive standalone security system that can be used depending on the capabilities of this system in homes, shops, parking door jacks, offices and in general control of any independent entrance.
Systems on the market and their insecurity (deactivation Electrical Lock, Opening the device from the installation site) prompted us to design and manufacture a comprehensive security system, with minimal cost, full support and warranty.
Surely it has happened to all of us that we leave the key behind the door or inside the house, and even on holidays we look for the key maker for hours and pay the price of our carelessness and forgetfulness.
Using a comprehensive standalone security system (M200N controller) and select the type of access(card - code - Remote) and proper lock (depending on the type of door and its use) You can give peace and security to your family.
You can also use the M200N access control system as a single-zone alarm to protect your home in your absence.
Due to the capabilities of the system and having a magnetic sensor input and alarm output that can be connected to an external alarm or caller, the entrance of your home is smart to notify you in case of unauthorized entry.
Ability to register disposable code Helps you travel so that in case of problems you can issue a one-time entry permit to people.
Reverse code capability, If a person or persons force you to use the code to enter the house, by entering your entry code in reverse, the system alarm will be activated, and if a telephone device is used, this event will be notified to the numbers registered in the system.
Ability to combine the use of card-code reader with matrix keyboard, this feature enables you to make all system settings from inside the house.
The ability to upgrade the remote module to the M200N system enables you to activate and drive the system with your remote parking.
The ON-OFF capability of the system allows this system to be used in shops.
In this way, every time the system is activated through the card-code or remote, the door lock will be opened, closed or closed.
Therefore, during the day when customers are traveling, activate the system in a free state and, if necessary, when resting or leaving the store.
All receivers on the market have a single memory, and if a remote is missing from the set, the entire device memory must be erased for security.
Imagine how difficult it can be to collect all the remotes from the people in the building and re-register them.
Using the M200N controller and adding a remote module, you can set an ID number from 1 to 1300 for each remote (even for each remote key, for example 4-key remotes) so that it can be easily removed if the remote is lost.
Technical specifications of the controller
- Has 1300 user memory (card - card and code - remote)
- Ability to combine card and remote with 1 to 3 digit code as AND
- Relay alarm output for external alarms and NO alarms
- With internal power of 300 mAh (reinforced for electric lock)
- Has a magnetic sensor input, push key and matrix keyboard
- Support for all learning remotes with 433Mhz, 315Mhz frequency
- Has a sensor input to make the door smart (single zone alarm)
- The possibility of using two matrix keyboards and a card reader with a keyboard at the same time
- Ability to define a permanent and disposable 6-digit passcode (for specific use)
- Support for all Wiegand 26 card readers with a frequency of 125Khz - 13.56Mhz
- Relay output for all types of electric, magnetic locks and automatic doors
- Completely secure, if you open the device from the installation site, there is no possibility of intrusion
- Ability to adjust the steering relay time in timing mode from 0.1 to 30 seconds using the keyboard
- Ability to use the remote control as ID (if you need to delete a remote)
- Ability to use a card reader with a keyboard and a Weigand26 card reader at the same time
- Has a reverse code system to increase the security factor of the system in case of emergency
- Ability to work in two modes of timing and ON-OFF with memory (for shops and special places)
- Has three modes of operation normal, safe, free and By Pass for use for a variety of uses
